Posted by bmar on May 08, 2003 at 13:18:35

In Reply to: 'Nother question on fin cutting posted by JLapaire on May 08, 2003 at 06:59:54:

I dont know anyone who has ever cut the fins out. You just slice the fin right in the middle at the welded joint. If you want to get tricky you can fill the kerf with an elastomer like SikaFlex and repaint the horn. The metal will still be seperated and stress relieved yet invisable as a cut.

Bill

• Thanks (nt) - JLapaire 03:58:50 05/09/03 (0)