Wayne , yesterday I sat down and started figuring out the flats cut I need to make and began wondering if 3/4" material is going to be enough. I went ahead and wrote out the flats cuts for 1" MDF and 1.5" MDF or Baltic Birch as well.
Since am spending $1100 on the parts I don't want to go the cheap route with these cabinets. This is the most I have ever spent on a speaker and they need to keep me happy for a very long time.
What should I do?Also I figured the Vb to be 3.65cuft before subtracting the drivers and port, so the total must be around 3.4cuft add stuffing and it should bring it to around 3.5cuft with a 6"x3.5"x10" the tuning is right around 34Hz....am I going to have a problem with the driver unloading?
Follow Ups: