Posted by wunhuanglo [ 67.35.237.160 ] on February 21, 2004 at 10:27:48:

In Reply to: Re: Another Hornresp Question posted by Wayne Parham on February 21, 2004 at 00:39:38:

I'm modeling a 6 inch Davis driver in free space (4 pi)

Sd 141
CMS 7.87E-4
MMD 11
Re 6.16
Bl 6.5
Rms 1.91
Le 0.61

What's an "approximation" is MMD. The data sheet says MMS is 11.5 grams. If I let hornresp do its thing it want to come up with a 16 gram cone, which can't be right.

Replies:

• Possible answer - Adrian Mack 22:14:04 02/21/04 (6)
  • Thanks, Adrian - wunhuanglo 22:53:02 02/21/04 (5)
    • Midrange horn answers - Adrian Mack 01:02:53 02/22/04 (4)
      • Thank you so much, Adrian - wunhuanglo 11:24:03 02/22/04 (3)
        • Re: Thank you so much, Adrian - Adrian Mack 03:35:47 02/23/04 (2)
          • mack - Mike.e 21:34:26 02/23/04 (1)
            • Re: mack - Wayne Parham 01:39:31 02/24/04 (0)
• I guess what might be happening - wunhuanglo 10:48:54 02/21/04 (1)
  • Re: I guess what might be happening - Wayne Parham 11:50:40 02/21/04 (0)