Posted by Cuppa Joe [ 205.188.117.72 ] on February 21, 2007 at 00:01:41:

In Reply to: Re: 1:1 throat area posted by DMoore on February 20, 2007 at 16:21:33:

I'm considering a 10" driver (again) for this application, as opposed to a 12" as used in the MSL-4. I'd also consider a pair of stacked 8" drivers (for power handling) if necessary, to get a longer horn for the mouth size. It's all just a clump of ideas for now!

Replies:

• Re: 1:1 throat area - Wayne Parham 10:48:00 02/21/07 (17)
  • Re: 1:1 throat area - DMoore 15:26:43 02/21/07 (16)
    • Re: 1:1 throat area - Wayne Parham 21:47:02 02/21/07 (15)
      • Re: 1:1 throat area - Cuppa Joe 23:24:13 02/21/07 (14)
        • Re: 1:1 throat area - Wayne Parham 11:04:50 02/22/07 (13)
          • Re: 1:1 throat area - DMoore 12:28:27 02/22/07 (12)
            • Re: 1:1 throat area - Wayne Parham 12:49:10 02/22/07 (11)
              • Re: 1:1 throat area - Cuppa Joe 22:28:25 02/22/07 (10)
                • Re: 1:1 throat area - Ian Swett 15:56:03 02/23/07 (9)
                  • Re: 1:1 throat area - Cuppa Joe 23:19:21 02/23/07 (8)
                    • Re: 1:1 throat area - Wayne Parham 19:41:32 02/26/07 (7)
                      • Re: 1:1 throat area - Ian 12:44:22 02/27/07 (6)
                        • Conical midhorns with 6" and 8" drivers - Wayne Parham 13:54:53 02/27/07 (5)
                          • Re: Conical midhorns with 6" and 8" drivers - Cuppa Joe 22:47:14 02/28/07 (4)
                            • Re: Conical midhorns with 6" and 8" drivers - Wayne Parham 00:27:23 03/01/07 (3)
                              • Re: 8PE21 Horn - swett 01:52:54 03/05/07 (0)
                              • Re: Conical midhorns with 6" and 8" drivers - Cuppa Joe 21:52:40 03/01/07 (1)
                                • Re: Conical midhorns with 6" and 8" drivers - Wayne Parham 22:38:31 03/01/07 (0)