Posted by Wayne Parham [ 66.139.39.38 ] on January 31, 2004 at 13:44:50:
In Reply to: My spl meter broke posted by Mike.e on January 31, 2004 at 12:33:14:
That's strange.
If the problem happened immediately after connecting a cable, and that cable wasn't connected to anything, I would suspect a mechanical connection problem. If the inputs were static sensitive, then an ungrounded open input might pop the meter, but I don't think that's it. Look inside the meter and see if you didn't break the connector loose from the printed circuit board. You may have accidentally cracked something in there.
Just a thought; It's worth a look.
[ HighEfficiencySpeakers Forum ] [ Help ]