Re: Capacitors

[ GroupBuild Forum ] [ Help ]

Posted by colinhester [ 65.186.5.10 ] on February 14, 2005 at 18:44:48:

In Reply to: Re: Capacitors posted by manualblock on February 14, 2005 at 18:33:25:

Damir's photo was invaluable in putting together the CCS. Keep it handy.

PC board is not the correct term. I used the plastic breadboards, the ones with lots of holes. You can get them at Rat Shack for a couple of bucks.

I got the LED from Parts Express. Rated at 1.7V and 20mA.

The L-beam has the 5687 heater parts and the CCS bread board.

RCA ins and outs will be mounted on the top plate ala Forepaly.

I'm having a bitch of a time placing all three caps under the hood. I wanted to mount the PS cap through a hole and out the top, but I decided against it. I think this is something I'm going to regreat later on.

My hook-up and bus wires were sent to day, so I should be up and running by the weekend (now there's some famous last words!)

What do you think of the new Tx? Now you can imagine my surprise when I picked my box up expecting only one to be in there. The spare Heyboer is sitting here. I'll hang on to it for as long as you like - no rush AT ALL........Colin


Replies:



[ GroupBuild Forum ] [ Help ]