Posted by Damir [ 213.202.115.195 ] on February 20, 2006 at 07:48:04:

In Reply to: Re: 300B Project, Part 6 - Cascode driver a little more posted by manualblock on February 19, 2006 at 18:03:18:

It`s not easy to evaluate and describe sonics. Tha "base" sound is SE 300B output stage coupled with my speakers (JBL 4208) - soft and warm.
I tried two CCS versions, one cascoded DN2540 mosfets, and MJE350/BC558B/LED (from M. Jones book, similar to C4S). Although later has lower Rout, I didn`t find the difference in sound in short listening test - 6J5 tube, anode out (more experiments later:-)). In comparison with 22k load resistor (about the same operating point), both CCS-ed versions sounded much better - cleaner...

Replies:

• Re: 300B Project, Part 6 - Cascode driver a little more - Wayne Parham 09:58:16 02/20/06 (8)
  • Re: 300B Project, Part 6 - Cascode driver a little more - Damir 13:03:08 02/20/06 (7)
    • Re: 300B Project, Part 6 - Cascode driver a little more - Wayne Parham 14:00:46 02/20/06 (6)
      • Re: I would like to build it - manualblock 16:01:57 02/20/06 (5)
        • Re: I would like to build it - Damir 00:49:31 02/21/06 (4)
          • Re: I would like to build it - manualblock 13:04:01 02/21/06 (3)
            • Re: I would like to build it - Wayne Parham 14:13:32 02/21/06 (2)
              • Re: I would like to build it - manualblock 15:12:34 02/21/06 (1)
                • Re: I would like to build it - Wayne Parham 15:30:16 02/21/06 (0)