Clarification

[ GroupBuild Forum ] [ Help ]

Posted by colinhester [ 65.27.130.154 ] on June 11, 2005 at 10:47:20:

In Reply to: ummmmm.... posted by Tnuctipun on June 11, 2005 at 08:47:32:

The original article I'm getting the schematic from calls for some pretty rare caps: PCB-filled Cornell-Dubliner Model 121J.

The power supply section is a 5R4WGT rectifier followed by an CLCLC. The first C is 10uF @1000V; L is 8H @200mA; next C are 5 10uF @600V; next L is 20H @ 50mA and the last C are 4 10uF @ 600V.

I'm hoping, as you suggested, to use 50 and 40uF, respectively, in the last two C sections.

The B+ is 430V, so it looks like stock 440V oil caps should do the trick across the board, including the 10Uf @ 1000V.

Thanks for the help.....Colin


Replies:



[ GroupBuild Forum ] [ Help ]