Posted by Wayne Parham [ 64.216.179.54 ] on December 18, 2004 at 07:42:11:
In Reply to: Re: AC/DC Electronics posted by manualblock on December 18, 2004 at 03:44:00:
With an oscilloscope, set the input for DC coupling. You'll see an offset, and that reflects the DC level. If all you have is a DVM, you could use a 1Kohm resistor in series and a large capacitor after that in shunt to filter out the AC. The DC level is all that will remain, so just measure it with the DC voltage setting on your meter.
[ General Forum ] [ Help ]