Posted by wunhuanglo [ 67.35.245.58 ] on April 10, 2005 at 18:32:00:
In Reply to: Re:OMIGOSH!!! A THREAD on Craftsmen!!!!! posted by Wayne Parham on April 10, 2005 at 11:02:55:
Eventually I'm going to build a pair of 3 ft^3 sealed subs. I was contemplating that today, and how to build them stiff/dead.
It occured to me that people always use sheet stock and then add braces. Some do the B&W thing and add a honeycomb of sorts to fill and stiffen from the interior.
Has anybody considered emulating a "stress panel" - building a frame out of say 2X2s and then covering the outside/inside with something like 1/2" MDF. I guess the cavities could be filled with Great Stuff or similar (expanding foam). That would result in walls 2-1/4 inches thick - ought to be quite stiff, like a helicopter floor. The baffle would probably be solid, or at least it would be most convienient.
[ Craftsmen Forum ] [ Help ]