Posted by Bill Martinelli [ 24.93.18.190 ] on March 16, 2005 at 21:57:23:
In Reply to: Re: Yes that's my Bugle knob posted by GarMan on March 15, 2005 at 12:53:40:
You can have good luck using a hole saw with noe center drill if you pre drill a hole with 'that hole saw' and clamp on the top of the new part you want to drill. The top guide wood should be 1/2 - 3/4 thick and clamped firmly onto the new piece to cut.
A drill press is important for this type of work.
using a hole saw with no center drill is hospital visit waiting to happen!
Bill
[ Craftsmen Forum ] [ Help ]