Posted by BillEpstein [ 12.75.71.242 ] on January 13, 2005 at 04:29:26:
In Reply to: Re: Need Options for Router Table posted by Challanged bySound on January 12, 2005 at 22:56:30:
When you need a short piece of trim push a longer piece thru the bit and then remove it from the table once you get to the length you need. Your hands never go past the bit.
Drill an 1/8" hole in the table near the bit, place a piece of rod in it and now you have an "index pin" you use to guide the workpiece into the bit for those times when you can't use a fence.
[ Craftsmen Forum ] [ Help ]