Re: Back to square one, so to speak

[ Craftsmen Forum ] [ Help ]

Posted by Bill Fitzmaurice [ 64.12.116.135 ] on August 30, 2004 at 11:48:36:

In Reply to: Re: Back to square one, so to speak posted by lon on August 30, 2004 at 10:43:56:

I use holesaws with a drill press whenever possible; they are tricky with hand held drills. With a hand held I use a heavy duty 1/2" drill at 800-1000 RPM with the workpiece clamped to the workbench.

I did use a 1/2" radius quarter round router bit to chamfer the inner side of the mounting holes to allow me to get in there with a tube of silicone sealeant to seal the drivers to the baffle.


Replies:



[ Craftsmen Forum ] [ Help ]