Posted by Bill Fitzmaurice [ 152.163.252.199 ] on July 21, 2004 at 11:35:33:
In Reply to: Re: Need help with Polyurathane. posted by James W. Johnson on July 20, 2004 at 15:11:56:
Simple painting pads, they measure various sizes. Available any where. These leave a minimum of finish texturing. The spray coat can be done with an aerosol urethane. A random orbit sander will leave swirl marks that will have to be removed by straight-line sanding, either by machine or elbow grease. I use a random orbit to get the wood ready for a finish, up to 220 grit. I then use a dark grain filler, which makes the swirl marks easily visible. I then use a straight line sander to take off the excess grain filler, and the swirl marks with it.
[ Craftsmen Forum ] [ Help ]