Posted by GarMan [ 216.13.136.38 ] on June 29, 2004 at 08:22:40:

In Reply to: Re: How Thick is Thick Enough? posted by elektratig on June 29, 2004 at 05:42:55:

You should try moving my 2PI Towers, built with 1" MDF all around!

I'm thinking 3/4" with good window bracing is all I need. Good point about the front panel. Once you cut for a flush mount, there's not much left to secure the driver.

I was surfing last night and saw some examples of extreme DIY cabinets. One guy built his speaker with three layers of 1/2" MDF. The middle layer was more of a spacer to allow him to fill the core with sand.

thanks,
Gar.

Replies:

• Re: How Thick is Thick Enough? - elektratig 13:37:30 06/29/04 (4)
  • One half inch. - Bill Fitzmaurice 15:30:03 06/29/04 (3)
    • Re: One half inch. - GarMan 16:14:12 06/29/04 (2)
      • Re: One half inch. - Bill Fitzmaurice 22:01:55 06/29/04 (1)
        • Re: One half inch. - Bill Martinelli 23:54:07 06/30/04 (0)