Posted by bill epstein [ 165.130.192.49 ] on March 26, 2007 at 10:06:40:

In Reply to: amp enclosure posted by blake on March 26, 2007 at 02:08:30:

As you've discovered, if you cut the rabbet after gluing up the box you're left with the rounded corners.
Just use 1/2" or bigger chisel to cut the square. Use the extra width of the flat edge to index against the already cut side of the rabbet. Alternate your cuts from one side of the corner to the other so as not to have a split.

Replies: