Posted by Matthew [ 152.3.51.71 ] on April 13, 2005 at 21:42:47:

well after much much help from thy and a lot of reading here's my expensive FINISHED like arrays...

http://www.sounddomain.com/memberpage/424669/4

each tower contains:

20 NSB's painted and modded with lacquer- HP'd at 400 hz, LP'd at 2.5khz@18db

8 7" Dayton Aluminum midbasses, in 2.5 cubes with polyfill, tuned to 34 hz, LP'd at 400 hz

1 Eminence Horn, with 14x7" lense, HP'd at 2.5khz@ 18db

each tower has custom passive crossovers with a power handling of 1400 watts PER TOWER!!!

I'm powering them with a QSC 2450... which gives each tower 1200 watts RMS

final impedence per tower (if not bi-amped or tri-amped) is 1.98 ohms

The camera made the paint look spotted but it really is quite unifrom and reflective

And the grills are flush with the horn area making the profile FLAT! very sexy in person

also they are only 6" deep at the top!

Replies: