Re: Line array question using Bandor 50mm driver?

[ ArraySpeakers Forum ] [ Help ]

Posted by Bill Fitzmaurice [ 64.12.116.135 ] on September 05, 2004 at 08:59:37:

In Reply to: Line array question using Bandor 50mm driver? posted by Norris Wilson on September 04, 2004 at 22:31:20:

The combing effect here would only extend a few inches out from the baffle at best, so that's not a particular concern. What would likely be problematic is off-axis response. The axial charts look OK out to 12kHz or so but with a 50mm radiating plane it's a very safe bet that the -6dB response at 30 degrees off-axis won't extend beyond 10kHz at best. Good HF dispersion requires no more than a 25mm radiating plane with point source drivers, and smaller than that is even better.


Replies:



[ ArraySpeakers Forum ] [ Help ]