Posted by Jose [ 196.2.124.251 ] on September 03, 2007 at 15:03:15:

In Reply to: Re: More questions? posted by Rick Craig on September 03, 2007 at 14:16:50:

Thanks Rick

Your comments are much appreciated. I use Tact 2.2XP for room and speaker correction because as you state, the open baffle arrangement does present some problems. Interestingly, at the listening position which is at about 3.3m, the Etons are reasonably flat from about 200-2000Hz but tail off rapidly below 200Hz. I thus use Tact W210 corner subs from 70-200Hz and JL Audio F113's below 70Hz. In effect this works pretty well even though it seems quite complicated. Having Tact amps with digital crossovers does however make it a lot easier to correct for the design limitations.
Any ideas or advice would be much appreciated.....;-)
Keep up the good work!

Regards

Jose

Replies: