Posted by Jose [ 196.2.115.187 ] on September 22, 2006 at 01:28:39:
In Reply to: Re: My line array pictures posted by MaRLBORO on September 21, 2006 at 18:41:49:
With the open baffle design the low end rolls off below 200Hz - I use 190Hz 36dB/octave crossover to corner subs and this works well. Above 200Hz the curve at the listening position is quite flat with a slight rise between 200-500. I use Tact RCS to adjust the curves.
I will try to post some pictures of the measurements later.
Jose
[ ArraySpeakers Forum ] [ Help ]