AudioRoundTable.com: Pi Speakers » BMS compression drivers and Pi ?

Home » Sponsored » Pi Speakers » BMS compression drivers and Pi ?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: BMS compression drivers and Pi ? [message #43768 is a reply to message #43754]

Mon, 26 January 2004 17:47

Crazy Dave
Messages: 67
Registered: May 2009

Viscount

Hi Bill,

I had some questions regarding the 4590. If one were to use the Eminence crossover (3rd order high-pass, 2nd order low pass @ 1600hz) in a JBL 2370, how much power could it take and how would you equalize it? It seems to have a rising high end above 15KHz. Do you need to compensate for this?

Dave

Report message to a moderator

[Message index]

		BMS compression drivers and Pi ? By: andreas paulsen on Wed, 21 January 2004 03:45
		Re: BMS compression drivers and Pi ? By: Adrian Mack on Wed, 21 January 2004 04:56
		Re: BMS compression drivers and Pi ? By: andreas paulsen on Wed, 21 January 2004 12:55
		Re: BMS compression drivers and Pi ? By: Adrian Mack on Thu, 22 January 2004 07:27
		Re: BMS compression drivers and Pi ? By: andreas paulsen on Thu, 22 January 2004 09:20
		Re: BMS compression drivers and Pi ? By: Bill Martinelli on Thu, 22 January 2004 09:55
		Re: BMS compression drivers and Pi ? By: Crazy Dave on Mon, 26 January 2004 17:47
		Re: BMS compression drivers and Pi ? By: Bill Martinelli on Wed, 28 January 2004 17:32
		Re: BMS compression drivers and Pi ?: OOPS! By: Crazy Dave on Thu, 29 January 2004 21:00
		Re: BMS compression drivers and Pi ?: OOPS! By: Bill Martinelli on Fri, 30 January 2004 15:15
		Great lookin' website! By: Wayne Parham on Fri, 30 January 2004 17:07
		Re: Thanks ! By: Bill Martinelli on Fri, 30 January 2004 21:25
		Re: BMS compression drivers and Pi ?: OOPS! By: Crazy Dave on Sat, 31 January 2004 18:16
		Eminence, not Peavey NT By: Crazy Dave on Sat, 31 January 2004 18:19
		Re: BMS compression drivers and Pi ?: OOPS! By: Adrian Mack on Sat, 31 January 2004 19:36
		Re: BMS compression drivers and Pi ? By: Adrian Mack on Mon, 26 January 2004 19:12
		Re: BMS compression drivers and Pi ? By: andreas paulsen on Wed, 04 February 2004 02:35
		Re: BMS compression drivers and Pi ? By: Adrian Mack on Fri, 06 February 2004 09:08
		See Bill Martinelli's Site By: Dean Kukral on Wed, 21 January 2004 06:28
		Re: BMS compression drivers and Pi ? By: Wayne Parham on Wed, 21 January 2004 10:40

Previous Topic:	can the 2445J use in the pro 4 instead of the 2426?
Next Topic:	baffle spacing, vertical alignment

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun May 19 09:44:13 CDT 2024