AudioRoundTable.com: Speaker » Horns and Room Size

Home » Audio » Speaker » Horns and Room Size

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

reflex vs. horn [message #17172 is a reply to message #17168]

Sun, 07 November 2004 08:43

pgolde
Messages: 21
Registered: May 2009

Chancellor

Hi Mike,
Cool website. The Jbl is a very kick ass speaker in a reflex, put it in a properly designed horn and I think you will take it to a new level. I found the Lab has a very different sound than the EVX 18's, lower extension, cleaner, louder, more HIFI. The EV's need no eq and sounded great, awsome rock and roll speaker, very musical. The single lab I am running does require eq to sound good, since I dont have 3 others built, or a corner to put it in. I could run the 18's to 800 Hz with no problems, but the Lab is crossed at 80Hz and allows me to get much higher, cleaner spl from the 15's I am using for midbass. I dont think the Lab is too much for them though, need to get some measurements at high levels. I am currently building test mics with the Panasonic mic capsules WM-61.
The problem with the horn is with such clean output at high levels, the room comes alive and has an even greater effect than with the 18's, besides the fact that it is more notcible with the cleaner output from the horn.
Have fun, looking foward to your comments on your horn when finished.
PG

http://mysite.verizon.net/vzeehga0/

Report message to a moderator

[Message index]

		Horns and Room Size By: Gerald59 on Wed, 20 October 2004 18:24
		Re: Horns and Room Size By: Wayne Parham on Thu, 21 October 2004 01:00
		Re: Horns and Room Size By: Bill Fitzmaurice on Thu, 21 October 2004 06:32
		Re: Horns and Room Size - m value, mouth size & length By: tuber on Thu, 21 October 2004 08:20
		M By: Mike.e on Thu, 21 October 2004 23:01
		I don't use M values in my sub horns, By: Bill Fitzmaurice on Fri, 22 October 2004 08:01
		Re: I don't use M values in my sub horns, By: pgolde on Fri, 22 October 2004 10:05
		Re: I don't use M values in my sub horns, By: tuber on Fri, 22 October 2004 10:39
		Re: I don't use M values in my sub horns, By: pgolde on Fri, 22 October 2004 11:05
		No magic just different compromises By: Mike.e on Fri, 22 October 2004 11:47
		Re: I don't use M values in my sub horns, By: pgolde on Fri, 22 October 2004 13:11
		Re: I don't use M values in my sub horns, By: Mike.e on Fri, 22 October 2004 15:32
		Re: I don't use M values in my sub horns, By: pgolde on Fri, 22 October 2004 16:16
		3/4 cams and basshorns By: Wayne Parham on Sat, 23 October 2004 00:45
		Re: 3/4 cams and basshorns By: pgolde on Sat, 23 October 2004 08:34
		Re: 3/4 cams and basshorns By: Wayne Parham on Sat, 23 October 2004 08:49
		Re: 3/4 cams and basshorns By: Mike.e on Sun, 24 October 2004 01:30
		Pay no attention to that man behind the curtain! By: Wayne Parham on Sun, 24 October 2004 05:07
		Or the sub behind the fence By: pgolde on Mon, 01 November 2004 19:02
		Re: Or the sub behind the fence By: Wayne Parham on Mon, 01 November 2004 21:19
		Very cool! By: Mike.e on Sun, 07 November 2004 02:09
		reflex vs. horn By: pgolde on Sun, 07 November 2004 08:43
		Sure thing By: Mike.e on Sun, 07 November 2004 16:56
		Re: I don't use M values in my sub horns, By: Bill Fitzmaurice on Fri, 22 October 2004 14:20
		Pics By: Wayne Parham on Sun, 24 October 2004 08:07
		Re: 3/4 cams and basshorns By: pgolde on Sun, 24 October 2004 20:00
		Re: 3/4 cams and basshorns By: Wayne Parham on Sun, 24 October 2004 23:27
		Labs Fired Up , Pics on the way By: pgolde on Sat, 30 October 2004 15:15
		Re: Labs Fired Up , Pics on the way By: Wayne Parham on Sat, 30 October 2004 15:21
		Re: Labs Fired Up , Pics on the way By: blades976 on Mon, 01 November 2004 18:40
		Re: Labs Fired Up , Pics on the way By: Wayne Parham on Mon, 01 November 2004 21:15
		Re: Labs Fired Up , Pics on the way By: pgolde on Tue, 02 November 2004 11:45
		Re: I don't use M values in my sub horns, By: tuber on Fri, 22 October 2004 10:35
		Re: I don't use M values in my sub horns, By: Bill Fitzmaurice on Fri, 22 October 2004 14:17
		Re: I don't use M values in my sub horns, By: tuber on Tue, 26 October 2004 09:56
		Re: I don't use M values in my sub horns, By: Adrian Mack on Sat, 30 October 2004 00:27
		Re: M By: tuber on Fri, 22 October 2004 10:32
		Ooops By: Mike.e on Fri, 22 October 2004 11:43
		Practically By: Mike.e on Thu, 21 October 2004 05:42
		Re: Practically By: tuber on Thu, 21 October 2004 08:11
		Re: Practically By: Mike.e on Thu, 21 October 2004 22:58
		Re: Practically By: tuber on Fri, 22 October 2004 10:31
		Thank you all for your comments By: Gerald59 on Sun, 24 October 2004 13:47

Previous Topic:	Scan Speaks
Next Topic:	Need Dynaudio Gemini speaker plans and suggestion?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue May 14 13:24:47 CDT 2024