AudioRoundTable.com: Speaker » Mono "flanking sub"

Home » Audio » Speaker » Mono "flanking sub"

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Mono "flanking sub" [message #81643 is a reply to message #81641]

Sat, 31 October 2015 13:21

jonone
Messages: 67
Registered: October 2015

Viscount

I'm sure Wayne will answer but yes the interference notches are from the room, and the speakers I'm guessing will be flat outside.
If you don't high pass your mains and you overlap the sub and mains then it makes sense to roll the sub in were the mains roll off to avoid a lump in the bass if they sum together.( or eq them)
If your sub is not that clean then the lower the crossover the better Imo, I had a sub before with a peerless driver and I couldn't cross it over 60hz really as it would get a bit boomy, although eq helped, I've also heard people say passive radiators can be boomy?
The driver I have now is super clean and measures more like a midrange driver and can be used as such, it has a very low le and 3 shorting rings, 150hz crossover is not a problem and I havent eq'd it yet.
Subs don't make good midrange drivers and vice versa so I think your better of using something like the acoustic elegance td series like I am for flanking subs.

Report message to a moderator

[Message index]

		Mono "flanking sub" By: jonone on Sat, 24 October 2015 05:50
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 25 October 2015 15:20
		Re: Mono "flanking sub" By: jonone on Mon, 26 October 2015 08:14
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 26 October 2015 08:44
		Re: Mono "flanking sub" By: jonone on Mon, 26 October 2015 12:05
		Re: Mono "flanking sub" By: jonone on Mon, 26 October 2015 15:06
		Re: Mono "flanking sub" By: Wayne Parham on Tue, 27 October 2015 13:23
		Re: Mono "flanking sub" By: johnnycamp5 on Tue, 27 October 2015 18:14
		Re: Mono "flanking sub" By: jonone on Thu, 29 October 2015 04:10
		Re: Mono "flanking sub" By: johnnycamp5 on Thu, 29 October 2015 11:24
		Re: Mono "flanking sub" By: jonone on Thu, 29 October 2015 14:23
		Re: Mono "flanking sub" By: johnnycamp5 on Fri, 30 October 2015 05:10
		Re: Mono "flanking sub" By: jonone on Fri, 30 October 2015 05:17
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 30 October 2015 16:37
		Re: Mono "flanking sub" By: johnnycamp5 on Fri, 30 October 2015 17:58
		Re: Mono "flanking sub" By: jonone on Sat, 31 October 2015 13:21
		Re: Mono "flanking sub" By: Wayne Parham on Sat, 31 October 2015 15:37
		Re: Mono "flanking sub" By: jonone on Sun, 08 November 2015 13:52
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 09 November 2015 12:57
		Re: Mono "flanking sub" By: jonone on Mon, 09 November 2015 14:44
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 09 November 2015 21:14
		Re: Mono "flanking sub" By: jonone on Tue, 10 November 2015 14:06
		Re: Mono "flanking sub" By: Wayne Parham on Tue, 10 November 2015 14:43
		Re: Mono "flanking sub" By: jonone on Tue, 10 November 2015 15:21
		Re: Mono "flanking sub" By: jonone on Tue, 10 November 2015 16:21
		Re: Mono "flanking sub" By: Wayne Parham on Wed, 11 November 2015 14:16
		Re: Mono "flanking sub" By: jonone on Wed, 11 November 2015 14:38
		Re: Mono "flanking sub" By: jonone on Tue, 24 November 2015 11:01
		Re: Mono "flanking sub" By: Wayne Parham on Tue, 24 November 2015 12:46
		Re: Mono "flanking sub" By: jonone on Tue, 24 November 2015 14:01
		Re: Mono "flanking sub" By: jonone on Wed, 25 November 2015 16:12
		Re: Mono "flanking sub" By: Wayne Parham on Wed, 25 November 2015 18:08
		Re: Mono "flanking sub" By: jonone on Thu, 26 November 2015 02:58
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 27 November 2015 16:23
		Re: Mono "flanking sub" By: jonone on Sat, 28 November 2015 11:29
		Re: Mono "flanking sub" By: jonone on Sun, 29 November 2015 14:41
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 30 November 2015 10:31
		Re: Mono "flanking sub" By: jonone on Mon, 30 November 2015 12:27
		Re: Mono "flanking sub" By: johnnycamp5 on Tue, 01 December 2015 12:01
		Re: Mono "flanking sub" By: jonone on Tue, 01 December 2015 16:05
		Re: Mono "flanking sub" By: johnnycamp5 on Tue, 01 December 2015 20:10
		Re: Mono "flanking sub" By: jonone on Wed, 02 December 2015 02:58
		Re: Mono "flanking sub" By: johnnycamp5 on Wed, 02 December 2015 05:19
		Re: Mono "flanking sub" By: jonone on Wed, 02 December 2015 07:07
		Re: Mono "flanking sub" By: jonone on Sat, 05 December 2015 08:27
		Re: Mono "flanking sub" By: johnnycamp5 on Sat, 05 December 2015 15:54
		Re: Mono "flanking sub" By: jonone on Sun, 06 December 2015 04:26
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 03:00
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 08:46
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 10:50
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 11:08
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 12:39
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 12:46
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 13:01
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 13:40
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 14:30
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 15:00
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 15:32
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 03:27
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 08:36
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 08:49
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 10:25
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 11:09
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 13:41
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 13:53
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 17:16
		Re: Mono "flanking sub" By: jonone on Sat, 16 July 2016 01:37
		Re: Mono "flanking sub" By: Wayne Parham on Sat, 16 July 2016 09:06
		Re: Mono "flanking sub" By: jonone on Sat, 16 July 2016 09:25
		Re: Mono "flanking sub" By: johnnycamp5 on Sat, 16 July 2016 11:48
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 17 July 2016 09:31
		Re: Mono "flanking sub" By: jonone on Sun, 17 July 2016 10:04
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 17 July 2016 11:16
		Re: Mono "flanking sub" By: jonone on Sun, 17 July 2016 12:05
		Re: Mono "flanking sub" By: jonone on Sun, 17 July 2016 12:55
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 17 July 2016 15:31
		Re: Mono "flanking sub" By: johnnycamp5 on Sun, 17 July 2016 16:18
		Re: Mono "flanking sub" By: jonone on Mon, 18 July 2016 07:52
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 18 July 2016 10:46
		Re: Mono "flanking sub" By: jonone on Wed, 10 August 2016 13:25
		Re: Mono "flanking sub" By: Wayne Parham on Wed, 10 August 2016 15:01
		Re: Mono "flanking sub" By: jonone on Thu, 11 August 2016 08:00
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 11 August 2016 08:40
		Re: Mono "flanking sub" By: jonone on Thu, 11 August 2016 14:54
		Re: Mono "flanking sub" By: jonone on Fri, 21 October 2016 12:52

Previous Topic:	Interconnect cables
Next Topic:	Class d for flanking subs

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue May 14 17:54:43 CDT 2024