AudioRoundTable.com: Thermionic Emissions » What about volume pot impedance?

Home » Audio » Thermionic Emissions » What about volume pot impedance?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

What about volume pot impedance? [message #10081]

Fri, 25 July 2008 07:50

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

Both my sources have output impedii (?) of less than 1000 ohms. I just received a 10k PEC pot to try in place of the 100k in my passive.

Seems like 100k is a de facto standard for pre-amps pots and attenuators. If most of these have output impedances below 1000 ohms and the favorable ratio is 1:10, why is this?

Report message to a moderator

[Message index]

		What about volume pot impedance? By: Bill Epstein on Fri, 25 July 2008 07:50
		Re: What about volume pot impedance? By: Wayne Parham on Fri, 25 July 2008 15:06
		Re: Just listened to the 10k pot By: Bill Epstein on Fri, 25 July 2008 23:30

Previous Topic:	12AX7s
Next Topic:	Sometimes I surprise myself

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Apr 28 05:37:47 CDT 2024