AudioRoundTable.com: Thermionic Emissions » bass preamp and 6418 pentode

Home » Audio » Thermionic Emissions » bass preamp and 6418 pentode

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: bass preamp and 6418 pentode [message #9093 is a reply to message #9091]

Thu, 21 July 2005 19:34

basstub
Messages: 3
Registered: May 2009

Esquire

Thanks 42.
Yes im using the A connection. and I was begining to think that the pin 3 or 5 is the cathode. It somehow interlinked with the filament?
I wasnt sure which one R4 or R3 to play with but will have a play in this area.
Since my post I have been playing with a standard 12AX7 and this has lead me to understanding a lot more about how the tubes work.
the 6418 is a weird thing and no doubt not the best place to begin the newbie curve

Report message to a moderator

[Message index]

		bass preamp and 6418 pentode By: basstub on Wed, 20 July 2005 23:10
		Re: bass preamp and 6418 pentode By: Forty2wo on Thu, 21 July 2005 18:04
		Re: bass preamp and 6418 pentode By: basstub on Thu, 21 July 2005 19:34
		Re: bass preamp and 6418 pentode By: Forty2wo on Thu, 21 July 2005 21:37
		Re: bass preamp and 6418 pentode By: basstub on Thu, 21 July 2005 23:48

Previous Topic:	Zout
Next Topic:	Fixed/cathode bias and AC

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat May 18 03:19:32 CDT 2024