AudioRoundTable.com: Thermionic Emissions

Home » Audio » Thermionic Emissions » amp input stage

Wed, 01 June 2005 20:22

Steve
Messages: 83
Registered: May 2009

Viscount

"A 12AX7 and .22 uF or so coupling cap is not going to cut it I suspect..."

Correct Douglas.

And even a 10:1 ratio isn't bad unless the output Z of the pre is fairly high. But then the IC and amp input capacitance would be more of a problem.

Take care.
Steve

		amp input stage By: PakProtector on Sat, 09 April 2005 05:42
		Re: amp input stage By: Manualblock on Sat, 09 April 2005 06:49
		Re: amp input stage By: PakProtector on Sat, 09 April 2005 10:58
		Re: amp input stage By: Manualblock on Sat, 09 April 2005 11:31
		Re: amp input stage By: Wayne Parham on Sat, 09 April 2005 08:14
		Re: amp input stage By: Steve on Mon, 11 April 2005 21:49
		some test results... By: PakProtector on Sun, 17 April 2005 07:39
		Re: some test results... By: Steve on Wed, 01 June 2005 20:22

Previous Topic:	Cathode drive
Next Topic:	November 2005 Vacuum Tube Valley Southern California Audio Festival

Goto Forum:

] [

]

Current Time: Tue May 14 18:27:55 CDT 2024