Home » Sponsored » Pi Speakers » DI-matched two-way loudspeakers (Lobes and nulls, crossover phase and baffle spacing, revisited)
Re: Lobes and nulls, crossover phase and baffle spacing [message #61478 is a reply to message #61477] Thu, 26 November 2009 21:37 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18688
Registered: January 2001
Illuminati (33rd Degree)

The three π loudspeaker has vertical nulls around 1.2kHz which are narrow bandwidth notches, fully out by 1.0kHz at the bottom and 1.5kHz up top. They only occur at fairly wide vertical angles, like you saw in the video, around +/- 30° from a midpoint between woofer and tweeter. The tweeter's vertical pattern is only +/- 20° from about 2.5kHz up, so the nulls are well outside the desired coverage angle and sort of punctuate the vertical pattern down low.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Don't forget to check under the hood
Next Topic: 4 pi plans
Goto Forum:
  


Current Time: Mon May 13 18:17:23 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest