AudioRoundTable.com: Pro Sound » Hiwatt dr103 and a 2x12 cab

Home » Audio » Pro Sound » Hiwatt dr103 and a 2x12 cab

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Hiwatt dr103 and a 2x12 cab [message #27088]

Sat, 02 July 2005 20:18

ollie
Messages: 1
Registered: May 2009

Esquire

Hi all,

i have a dr103 (custom hiwatt100) and i had a home made 4x12 which i have cut in half, its now a 2 x 12 with 2 16ohm 50w speakers,
Which way will i have to wire it to make sure nothing blows..?

Report message to a moderator

Re: Hiwatt dr103 and a 2x12 cab [message #27092 is a reply to message #27088]

Thu, 07 July 2005 16:03

Damir
Messages: 1005
Registered: May 2009

Illuminati (2nd Degree)

Well, wire those two speakers in parallel, you`ll get 8 Ohms/100W/2+12" box and connect it to...hmmm, yes - 8 Ohms tap!
(BTW, friend of mine uses 4-8-16 Ohms selector on his "Hiwatt" head with 8 Ohms cabinet like some kind of "tone" switch:-). Possible, but not really reccomendable with every amps/speakers...).

Report message to a moderator

Previous Topic:	Marhsall JCM2000 DSL50 volume drop problem...HELP?
Next Topic:	guitar amp questions

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jun 05 05:23:51 CDT 2024