| |
207 Search Results Found |
| 1 |
Forum: Pi Speakers «»
Posted on: Tue, 16 March 2010 11:31 «»
By: Wayne Parham
Baffle Step
…
In my opinion, baffle step compensation filters can be useful, but only for a fairly limited number of loudspeaker types. I think they are way overused in the DIY community. BSC filters are best suited for little mini-monitor speakers with small …
|
| 2 |
Forum: Pi Speakers «»
Posted on: Sun, 04 August 2002 12:25 «»
By: Adam
baffle step
…n, this won't be an issue.I personally think baffle step compensation is unnecessary and shouldn't be hardwired into any speakers unless you know thye will always be run in half space.Keep them close to a wall and the effect should be negligable. None of …
|
| 3 |
Forum: Pi Speakers «»
Posted on: Sun, 26 December 2010 22:09 «»
By: Wayne Parham
Constant directivity verses on-axis EQ for non-uniform directivity (aka baffle step filters)
…
I'm not a proponent of baffle step compensation, at least not for physically large speakers like mine. This is especially true for speakers that have constant directivity because baffle step is caused by a directivity change. If a speaker has constant…
|
| 4 |
Forum: Speaker «»
Posted on: Thu, 29 January 2004 17:20 «»
By: BillEpstein
Baffle step compensation
…Forum' and Madisound and others they treat baffle step compensation as something any nitwit does as a matter of course.So if my speakers are out in the room I need to do this BSCT (baffle step comp thang)?But what if my speaks are against a wall, 1/4 …
|
| 5 |
Forum: Pi Speakers «»
Posted on: Wed, 14 March 2007 05:20 «»
By: dB
Baffle step compensation
…
Hi Wayne,What is baffle step compensation?I know there are rectifications to do in the front side of a speaker (and xover), but I don't know if the problem exists more in the bass or any other frequency. I know there are adjustments in the 2K & 3K area …
|
| 6 |
Forum: Pi Speakers «»
Posted on: Thu, 06 February 2003 23:59 «»
By: Colin
Baffle step correction
Hi Wayne,Is any baffle step correction needed with the 2pi towers?Thanks,Colin
|
| 7 |
Forum: Pi Speakers «»
Posted on: Mon, 27 December 2010 10:12 «»
By: Wayne Parham
Re: Constant directivity verses on-axis EQ for non-uniform directivity (aka baffle step filters)
…for others that may drop in and read about baffle step. Bill has been a regular here for about 10 years, and has built just about everything I've designed. We've done the same trade shows more than once - I've been to his woodworking seminars and he's …
|
| 8 |
Forum: Speaker «»
Posted on: Mon, 16 February 2009 12:20 «»
By: Wayne Parham
Baffle step and collapsing directivity
…discussion with some folks that considered baffle step correction a mandatory step in crossover design. I don't dismiss it entirely, but I do think it is sometimes given too much emphasis. Another thing I noticed is that these people didn't consider the…
|
| 9 |
Forum: Pi Speakers «»
Posted on: Thu, 27 December 2012 19:14 «»
By: Wayne Parham
Re: 3pi, smaller cab possible?
…
Changing the size of the baffle will alter the speaker's directivity at low to midrange frequencies. At low frequencies, the speaker radiates omnidirectionally but as frequency rises, the baffle begins to limit the radiation pattern to the forward-…
|
| 10 |
Forum: Pi Speakers «»
Posted on: Tue, 31 August 2010 17:08 «»
By: Wayne Parham
In-wall flush mounting
…arter-space or eighth-space, and I don't use baffle step compensation filters. My thinking has always been that the baffles are rather large, so the transition happens in the lower midrange, close to where room modes take over. That's not where you …
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
