| |
432 Search Results Found |
| 1 |
Forum: Pi Speakers «»
Posted on: Fri, 20 February 2004 11:07 «»
By: replay
crossover
…question. i'm currently using the rane active crossover with great success. i have a bryston crossover which bryston will program to x-over at 1.7khz. they tell me in mono the slope is 24db/octave however in stereo it will be 18db/octave. should this …
|
| 2 |
Forum: Pi Speakers «»
Posted on: Thu, 29 July 2004 08:13 «»
By: Wayne Parham
Active Crossover
…can offer only a model of an active crossover that implements the same EQ as the passive π crossover. The model is made for PSpice and is based on the Steve Bench active crossover. Circuit boards are available.
Active implementation of π …
|
| 3 |
Forum: Pi Speakers «»
Posted on: Sun, 17 October 2004 18:30 «»
By: Malcolms
active crossover
…stage 4pi,s and came across the subject of active crossovers in the forums. I have a question as to whether a Behringer crossover would work with them. I have two 60 watt quicksilver mono blocks and a two channel gainclone also I am using a Harmon Kardon …
|
| 4 |
Forum: Speaker «»
Posted on: Sun, 02 December 2007 20:27 «»
By: Tom R.
active crossover?
…
I am considering using an active crossover for a line array. The short list is Marchand XM 16 (48 dB/oct filterslope) or one of the Behringer units. At the moment, I need RCA connectors in & out.I like the idea if the Marchand - give me a piece of …
|
| 5 |
Forum: Pi Speakers «»
Posted on: Sun, 15 May 2005 11:12 «»
By: Malcolms
Active Crossover
…
Hello, I finished building a pair of stage 4pi's using the eminence drivers. I just aquired a behringer dcx2496 digital crossover. I would like some info as to where to set the crossover points. I will be bi-amping using 60w tube mono blocs for the highs…
|
| 6 |
Forum: Pi Speakers «»
Posted on: Thu, 21 October 2004 07:57 «»
By: Malcolms
active crossover
Hello Wayne, I have a friend that can build me a tube crossover. What specs for the stage 4pi do I need. He has experience building crossovers. Malcolm
|
| 7 |
Forum: Pi Speakers «»
Posted on: Tue, 02 September 2003 15:05 «»
By: LuxmanLover
Active Crossover
…this applies to you Bill, but I went to an active XO a while back and experienced hum that wasn't present with the passive XO. My problem turned out to be cable related. On the back of my XO (Urei 525) there is provision to use XLR's or barrier strips on …
|
| 8 |
Forum: Silicon Valley «»
Posted on: Mon, 30 March 2009 17:27 «»
By: Wayne Parham
Active Sub Crossover
…
On a lark, I purchased an active subwoofer crossover module a few months back. I was looking at options to plate amps, something that would allow me to use one of my many existing amplifiers with subs. My thinking was that plate amps are fine, but I …
|
| 9 |
Forum: Pi Speakers «»
Posted on: Sun, 29 June 2008 19:35 «»
By: Wayne Parham
Active crossover settings
… be impressed when you're done with it. But active crossovers have definite advantages too. The trick is dialing it in. The passive has already been optimized with Spice and WTPro. So if you implement an exact copy of it in an active crossover, the …
|
| 10 |
Forum: Speaker «»
Posted on: Tue, 16 January 2007 17:43 «»
By: SPGEEE07
Active Crossover Design
… network. My group has decided to employ an active-filter crossover; the 4th order Linkwitz Riley to negate the issue of off-axis acoustical response due to electrical phase delay and to take advantage of the 24dB/octave roll-off characteristics.I have …
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
