Home » Sponsored » Pi Speakers » Still more Theater 4 tweaking...
Still more Theater 4 tweaking... [message #38674] Wed, 16 October 2002 09:20 Go to next message
Garland is currently offline  Garland
Messages: 269
Registered: May 2009
Grand Master
Since I can't leave the 4's well enough alone, I installed a pair of .56uF Alpha Core inductors in place of the stock Eminence .6uf and noticed a distinct gain in clarity. This completes the removal of the original stock crossover from these Pi's. The soundstage moved back a bit and I feel there is a reduction in the projection of certain undetermined frequencies which had been slightly bothering me. I do seem to sense a (very small) bit of new grain in the upper freq. but this may well be an exposure of some other upstream problem caused by the increased clarity. The coils are also brand new, so break-in is to be expected(at least by me). The tone of certain recordings has also changed which is very curious. The new sound is probably best described as darker with a more velvety and bronze-like character. The sense of dynamics hasn't changed,in fact the micro dynamics has possibly even improved! Over all, I like the change! More later....

Garland

Inductors or capicitors? [message #38677 is a reply to message #38674] Wed, 16 October 2002 10:18 Go to previous messageGo to next message
LuxmanLover is currently offline  LuxmanLover
Messages: 164
Registered: May 2009
Master
I'm assuming you're talking about inductors (coils) right.....the uF has me wondering.
Kelly
Inductors! Yes! I meant mH! Sorry. nt [message #38680 is a reply to message #38677] Wed, 16 October 2002 11:52 Go to previous messageGo to next message
Garland is currently offline  Garland
Messages: 269
Registered: May 2009
Grand Master
nt
Re: Still more Theater 4 tweaking... [message #38681 is a reply to message #38674] Wed, 16 October 2002 12:34 Go to previous message
Neo is currently offline  Neo
Messages: 33
Registered: May 2009
Baron
Hi Garland,

Is it the tweeter coil you changed? It must be because the woofer coil is 1mH. I upgraded all my crossover components, except the tweeter coil. Hmmmm... and that makes a difference? It's not directly in the signal path... I wonder why ?

If you found a positive difference, I'll give it a try.

Thanks for the info...

Tom -

(remember me... we talked at the meeting at DRCope's place. I brought my rebuilt Pi 4 crossovers.)

Previous Topic: damping a H290 Horn
Next Topic: One Pi
Goto Forum:
  


Current Time: Tue Jun 11 12:33:09 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest