AudioRoundTable.com: Pi Speakers » Where to source port for Theatre 4's?

Home » Sponsored » Pi Speakers » Where to source port for Theatre 4's?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Where to source port for Theatre 4's? [message #33865]

Mon, 17 September 2001 15:08

BillEpstein
Messages: 886
Registered: May 2009

Illuminati (2nd Degree)

Been thru the pages, got my veneer and MDF ready, waiting for the speakers but I can't seem to find the proper size port off the shelf. Something was posted about carpet cardboard tubes but they differ in size from the working drawing. A little help?

Report message to a moderator

Re: Where to source port for Theatre 4's? [message #33867 is a reply to message #33865]

Mon, 17 September 2001 18:16

James W. Johnson
Messages: 199
Registered: May 2009

Master

Is it a 4" port?...If so Home Depot has tons of 4" PVC for cheap, and most carpet tubing is indeed 4" diameter.

Report message to a moderator

4" port [message #33869 is a reply to message #33865]

Mon, 17 September 2001 20:55

Wayne Parham
Messages: 18700
Registered: January 2001

Illuminati (33rd Degree)

The port is 4" dia. and 4" long. The material I use is cardboard mailing tube. It is available at any drafting or office supply shop. The outside diameter is 4", inside diameter is 3.84". It's perfect.

Report message to a moderator

Previous Topic:	port questions - pro pi7's
Next Topic:	port dimensions - pro pi7

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jun 06 20:09:04 CDT 2024