|
|
|
|
|
|
|
Re: vanes here! [message #32022 is a reply to message #32020] |
Sat, 23 September 2006 11:50 |
Bill Epstein
Messages: 1088 Registered: May 2009 Location: Smoky Mts. USA
|
Illuminati (2nd Degree) |
|
|
Find a spoke shave at a flea market. Tune and sharpen it. Cut the flare with a jigsaw or bowsaw and Plane the curve to the line with the spokeshave. Or 3M #77 spray glue 60 grit paper on an 1 1/4" dowel. Shouldn't take much longer than the spokeshave. But it's such a satisfying tool to use. I mostly use my Record convex one to smooth out speaker cut-outs after I've managed to have that freakin' dimple cut-out when the hole jig slips as the cut-out is completed.
|
|
|
|
|