Home » Audio » Thermionic Emissions » 6EM7 amp PSU question
Re: 6EM7 amp PSU question [message #11274 is a reply to message #11273] Sun, 22 January 2006 04:18 Go to previous messageGo to previous message
Damir is currently offline  Damir
Messages: 1005
Registered: May 2009
Illuminati (2nd Degree)

See this variant - choke input filter (10H/100 Ohms/200mA) with "tuning" C1=1,5µF/600V (MKP, MKT...), then C2=220µF/450V electrolitic.
Bypass C2 with "bleeder" resistor, Rb=27kOhms/5W (it draws 8mA).
Then split for two channels - L2/C3 + R1/C4 for the L channel, and identical LC+RC filter for the R ch.
You`d get about 213V for the output stage, and 207V for the driver.
Of course, Rtr is a guess, and maybe you`d need to adjust the value of C1. Caps C3 and C4 can be "motor run", or MKP/MKT, 400Vdc ratings.
BTW - if you choose to build it, you can post on "Group Build" (Tube DIY) forum...

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: first tube amp project (nonguitar), which?
Next Topic: re tube your Anthem yet?
Goto Forum:
  


Current Time: Thu Oct 31 18:11:40 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest