AudioRoundTable.com: Speaker » 2 audax pr 17omo on open baffle vertical 1/16th" apart

Home » Audio » Speaker » 2 audax pr 17omo on open baffle vertical 1/16th" apart

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

2 audax pr 17omo on open baffle vertical 1/16th" apart [message #17861]

Wed, 25 May 2005 11:23

adavis464
Messages: 64
Registered: May 2009

Viscount

They have a hollow grainy sound up to 9 or 10 feet after that this effect goes away.I haven't measured them but I will soon is this caused by the comb effect.Or maybe high frequency breakup I am using them to 6000Hz.regards

Report message to a moderator

Re: 2 audax pr 17omo on open baffle vertical 1/16th" apart [message #17866 is a reply to message #17861]

Thu, 26 May 2005 08:55

spkrman57
Messages: 522
Registered: May 2009

Illuminati (1st Degree)

Taking a wild guess is that you need to cut one of them down crossover frequency wise. I would run one of them at around approx 800hz and see if that helps. Just a simple coil @ 1st order.

Hope this helps out!

Ron

Report message to a moderator

Previous Topic:	Cone Drivers
Next Topic:	Speakers for Dared MP-7

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat May 11 18:50:39 CDT 2024