Posted by Eric MAINARDI [ 82.252.69.162 ] on January 08, 2005 at 05:46:53:
In Reply to: TRIPHON II Electronic Crossover posted by Wayne Parham on November 02, 2004 at 21:54:46:
Hello,
For those who are convinced by multiamping, our TRIPHON II system is a modern and really high end solution : an electronic crossover coupled to a quad amplifier dedicated to the MID and HIGH frequencies. Consequently, your current amp will now drive your bass section.
It is a full audio FET design system. No bipolar transistor can be found in the audio circuits. We only use polystyrene (styroflex)and silvered mica capacitors. It is absolutely transparent and musical. Distorsion is at the limit of current measurement systems.
The CROSSOVER section offers a pure 12dB LINKWITZ-RILEY configuration with 6dB R-C cells stacked and isolated by ideal transparent FET buffers. Of course, choice is given between 6dB or 12db slope crossover according to your tests and your taste.
No correction or equalization is included because it must be achieved (if necessary) by passive means directly on each driver. So TRIPHON cannot be considered as an “active” filter.
The power supply section is designed according the most audiophile criteria.
Best audiophile components available (including transformers) are used : Glass-Teflon printed circuit boards, SILVER plated wires and connectors, almost NO wiring, etc.
The TRIPHON II is extremely reliable : it is designed to be ON 24/7.
It is available as 3-way system and now in 2-way version.
Further details are available from :
http://www.selectronic.fr/selanglais/Triphon2/triphon2.htm
Best wishes to you all.
EM
[ Selectronic Forum ] [ Help ]