Posted by Bill Epstein [ 96.36.85.31 ] on December 10, 2008 at 22:28:40:
In Reply to: Re: Help with 4Pi box (newbie questions) posted by Wayne Parham on December 10, 2008 at 15:00:54:
The port is just a 4 sided box, open at both ends.
Have your friend make it to exact size but the cut-out in the baffle a litle smaller so after it's glued on he can use a flush trim bit to make the baffle cut-out neatly flush with the port.
The brace in the second pic is not a substitute for 1x4 or 2x4 pieces glued directly to the inside of the cabinet, then cross-braced. It helps with bracing but moreso with getting the box perfectly square during glue-up.
[ PiSpeakers Forum ] [ Help ]