Posted by Skip_Pack [ 66.226.235.123 ] on August 09, 2007 at 12:04:44:
In Reply to: Re: Pi Sevens up and running! posted by Tim Barnes on August 08, 2007 at 12:47:42:
I've used 1" 'dowels' several times -- available from Home
Depot. Cut them to length, see if you can straighten them
into position, if not sand the ends slightly and try again.
Once you have a fit, take them out, smear glue on both sides
and put them back. Once you see/feel what's vibrating, you
get a pretty good idea about where to put them.
Skip
[ PiSpeakers Forum ] [ Help ]