Posted by Damir [ 213.202.69.13 ] on April 15, 2005 at 14:52:15:

Hi, nice to be back...
I built two "universal" CCS "module" on the PCB. Marker and nail- polish, then Fe-III-Chlorid, as usual...Thanks Doug for the mosfets:-)
I added local decoupling cap 1uF/630V (not necessary). Dimensions of the board are 32x75mm. As you can see, I didn`t install R3 yet, I planned to use a fixed resistor. I tried both CCS with battery and they worked, but didn`t try it in the real circuit so far...

Replies:

• Re: New PCB for the CCS - 2 - Damir 14:54:56 04/15/05 (5)
  • Re: New PCB for the CCS - 2 - Wayne Parham 11:54:55 04/16/05 (0)
  • Welcome back - colinhester 11:02:31 04/16/05 (3)
    • Re: Welcome back - Damir 13:07:22 04/16/05 (2)
      • Re: Welcome back - colinhester 15:18:28 04/16/05 (1)
        • Re: Welcome back - manualblock 07:47:52 04/17/05 (0)